C 2500 Yukon XL 2WD V8-8.1L VIN G (2002)
7. Disconnect the fuel fill pipe ground strap (3).
8. Disconnect the rear axle vent hose from the retainer on the fuel fill pipe, if applicable.
9. Loosen the fuel vent hose to fuel tank clamp (1).
10. Loosen the fuel fill hose to fuel tank clamp (11).
11. Disconnect the fuel fill pipe bracket bolt (3).
12. Disconnect the fuel fill and vent hoses from the fuel tank.
13. Remove the fuel fill and vent pipe and hose assembly.
14. Cap the open end of the fuel tank.
INSTALLATION PROCEDURE
1. Uncap the fuel tank.
