C 2500 Yukon XL 2WD V8-8.1L VIN G (2002)
2. Install the bolts.
Tighten the bolts to 12 Nm (106 inch lbs.).
3. Connect the sensor link to the ball stud.
4. Connect the sensor harness connector to the vehicle harness connector.
5. Install the wheel onto the vehicle.
6. Lower the vehicle.
Right
Rear Position Sensor Replacement - Electronic Suspension - Right
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the wheel from the vehicle.
