C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
Heated Mirror Relay: Service and Repair
REMOVAL PROCEDURE
1. Rotate the I/P assembly forward.
2. Untape the heated mirror relay(2) that is secured to the wiring harness next to the green door lock inversion module(1) to allow access.
3. Disconnect the heated mirror relay connector(2).
4. Remove the heated mirror relay(2) from the vehicle.
INSTALLATION PROCEDURE
1. Reconnect the electrical connector to the heated mirror relay(2).
2. Resecure the heated mirror relay(2) to the wiring harness in its original position.
3. Reinstall the I/P by rotating back to its original position.