C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
Power Seat Switch: Service and Repair
Lumbar Switch Replacement
Removal Procedure
1. Remove the seat from the vehicle.
2. Pull the switch out from the opening in the side of the seat cushion.
3. Remove the switch wiring harness in-line connector.
4. Remove the switch and the wiring harnesses from the side of the seat cushion.
Installation Procedure
1. Route the switch wiring harness through the opening in the side of the seat cushion.
2. Install the switch wiring harness to the vehicle wiring harness.
3. Position the switch in the seat cushion opening and install the screws.
4. Install the seat assembly in the vehicle.