C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
Brake Caliper: Service and Repair
Brake Caliper Overhaul
Front
Brake Caliper Overhaul - Front
^
Tools Required
-
J24548 Piston Seal Installer
Disassembly Procedure
1. Remove the fluid from the caliper.
Caution: Do not place your fingers in front of the piston in an attempt to catch or protect it when applying compressed air. This could result
in serious injury.
Notice: Use only enough air to ease the piston out of the bore. If the piston is blown out, even with the padding, it can be damaged.
2. Remove the brake pad. Clean the interior of the caliper with clean shop towels.
3. Remove the piston.
4. Direct the compressed air into the caliper fluid inlet.
5. Remove the boot.
6. Remove the piston seal with a nonmetal tool.