C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
3. Inspect the brake caliper mounting plate (1) for cracks or elongated bolt holes.
4. Replace the mounting plate if necessary.
Installation Procedure
1. Install the brake caliper mounting plate (1) to the rear axle.
Important: Ensure that the threads are clean and greaseless before applying threadlocker.
2. Apply 272 Threadlocker GM P/N 12345493, or the equivalent, to the threads of each brake caliper mounting plate bolt.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the bolts and washers.
^
Tighten the brake shield bolts to 32 Nm (24 ft. lbs.).
^
Tighten the brake caliper mounting plate bolts to 220 Nm (162 ft. lbs.).
4. Install the brake rotor.
5. Install the brake caliper (5).
6. Lower the vehicle.
7. Remove the blocks.
