C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
11. Remove the park brake shoes.
12. Inspect the springs for signs of wear or excessive heat. Replace as needed.
13. Inspect the support plate friction points for wear. Replace if wear is excessive.
Installation Procedure
1. Install the park brake shoes to the support plate.
2. Connect the park brake shoe retaining springs.
3. Install the support plate and park brake shoe assembly to the backing plate.
4. Install the index lever and spring assembly between the shoes.
5. Install the backing plate, support plate, index lever and spring, and park brake shoe assembly to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
6. Install the support plate washers and bolts.
Tighten the bolts to 105 Nm (77 ft. lbs.).