C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
5. Install the inlet heater hose to the thermostat housing.
6. Install the upper radiator hose and clamp to the thermostat housing and the radiator.
7. Install the A/C compressor the engine lift bracket.
8. Install idler pulleys to the engine lift bracket.
9. Install the auxiliary generator (if equipped) to the engine lift bracket.
10. Install the engine cooling fan to the water pump.
11. Install the drive belt on the drive pulleys.
12. Install the fan shroud on the radiator.
13. Refill the cooling system.
14. Connect both the battery negative cables to the batteries.