C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
9. Remove the engine mount bracket from the engine block.
Installation Procedure
1. Install the engine mount bracket to the engine block.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the engine mount bolts, nuts, and washer.
Tighten the bolts to 54 Nm (40 ft. lbs.).
3. Install the engine mount to the frame.
4. Install the engine mount bolts, nuts, and washer.
^
Tighten the bolts to 59 Nm (44 ft. lbs.).
^
Tighten the nuts to 45 Nm (33 ft. lbs.).
5. Lower the engine assembly until the engine mount through-bolt can be installed.
