C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
tube end in order to ensure neither is bent. Replace the cooler line or the retaining clip if necessary, and reinstall the oil cooler line.
18. Install the cooler line into the quick connect fitting again in order to install the remaining cooler lines into the remaining quick connect fittings.
19. If equipped with a 6.5L engine, install the cooler line fittings (2) to the oil cooler (1).
Notice: Refer to Fastener Notice in Service Precautions.
20. Tighten the oil cooler lines.
Tighten the oil cooler line fittings to 24 Nm (18 ft. lbs.).
21. If equipped with a 6.5L engine, install the oil cooler line clip.
22. If equipped with a 8.1 L engine, install the oil cooler line clip.
23. Check and add transmission fluid if needed.
