C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
Oil Pump Drive Shaft: Service and Repair
OIL PUMP DRIVE REPLACEMENT
Removal Procedure
Notice: Do not run the engine without the oil pump drive in place. This will cause extensive engine damage.
1. Remove the engine cover from the upper intake manifold.
2. Disconnect the negative battery cables from the batteries.
3. Remove the fuel filter from the lower intake manifold and position to the side secure out of the way.
4. Tie the engine wiring harness extension harness assembly out of the way.