C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
4. Install the mounting bolts in the upper intake manifold.
Tighten the bolts to 23 Nm (17 ft. lbs.).
5. Tighten the air intake hose clamps on the upper intake manifold.
Tighten the clamps to 6 Nm (50 inch lbs.).
6. Install the boost pressure sensor on the upper intake manifold.
7. Install the intake air temperature sensor to the upper intake manifold.
8. Install the braces from the turbocharger to the upper intake manifold.
9. Install the upper engine cover to the upper intake manifold.
10. Connect both the battery negative cables to the batteries.