C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
Vacuum Pump: Service and Repair
Vacuum Pump Replacement
Removal Procedure
^
Tools Required
-
J25034-C Power Steering Pump Pulley Remover
-
J25033-C Power Steering Pump Pulley Installer
1. Remove the drive belt from the drive pulleys.
2. Remove the vacuum line from the vacuum pump.
3. Remove the bolt retaining the ground strap and the battery negative cable from the vacuum pump.
4. Remove the vacuum pump mounting bolts.
5. Remove the vacuum pump from the generator bracket.
6. Remove the vacuum pump pulley:
6.1.
Place the vacuum pump in a vise.