C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
1. Install the recirculation actuator (19) to the module.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the screws to the recirculation actuator (19).
Tighten
Tighten the recirculation actuator screws to 2 N.m (18 lb in).
3. Connect the electrical connector to the recirculation actuator (19).
4. Roll the Instrument panel forward in the vehicle. Refer to IP Assembly - Rotating in Instrument Panel, Gauges and Warning Indicators.
