C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
1. Use the J 26549-E in order to install the expansion tube (3) into the condenser outlet pipe (2).
2. Install the new O-ring seal.
2.1. Coat the O-ring seal with 525 viscosity refrigerant oil.
2.2. Insert the short screen end of the new orifice into the evaporator tube.
3. Connect the evaporator tube to the condenser.
4. Install the grille.
5. Charge the system.
6. Leak test the fitting(s) of the repaired or reinstalled component using the J 39400-A.
For a description of the RPO Code(s) shown in this article/images refer to the RPO Code List found at Vehicle/Application ID See: Application and
ID/RPO Codes
