C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
Hose/Line HVAC: Service and Repair
Compressor Hose Assembly Replacement
TOOLS REQUIRED
-
J 38042 Dual O-Ring Tube Separator
-
J 39400-A Halogen Leak Detector
REMOVAL PROCEDURE
1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
2. Remove the grille.
3. Remove the compressor hose bolt from the A/C compressor.
4. Disconnect the hose assembly from the top of the compressor.
5. Remove the sealing washers.
6. Disconnect the hose assembly from the accumulator using the J 38042.
7. Remove the O-Ring seals from the accumulator hose.
8. Disconnect the hose assembly from the condenser.
9. Remove the O-ring seal from the condenser hose.
10. Cap or plug all of the open connections.
INSTALLATION PROCEDURE