C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
1. Install the glow plug relay on the mounting studs.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the glow plug relay mounting nuts.
Tighten
Tighten the nuts to 42 N.m (31 lb ft).
3. Install the wiring harness connector to the relay.
4. Install the glow plug wiring harness and nuts.
Tighten
Tighten the nuts to 5 N.m (44 lb in).
5. Install the negative battery cables.
Removal Procedure 2
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.