C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
1. Install the retractor and belt to the floor.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the bolt through the retractor into the floor panel weld nut.
Tighten
Tighten the bolt to 55 N.m (41 lb ft).
3. Install the bolt through the anchor plate and washer into the door pillar weld nut.
Tighten
Tighten the bolt to 55 N.m (41 lb ft).
4. Install the cover over the door pillar anchor plate.