C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
Seat Belt Buckle: Service and Repair
Regular Cab With Bench Seat
REMOVAL PROCEDURE
CAUTION: Refer to Belt Replacement Caution in Service Precautions.
NOTE: Refer to Servicing and Replacing Seat Belts Notice in Service Precautions.
1. Remove the cover from the buckle assembly which conceals the nut.
2. Remove the nut from the buckle assembly to floor weld stud.
3. Remove the seat belt warning wire from the buckle assembly on the driver's side only.
4. Remove the buckle assembly from the vehicle.
INSTALLATION PROCEDURE
1. Install the buckle assembly to the floor panel.
2. Install the seat belt warning wire to the buckle assembly on the driver's side only.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the nut to the buckle assembly and onto the floor panel weld stud.
Tighten
Tighten the nut to 42 N.m (31 lb ft).
4. Install the cover assembly over the nut.