C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
Crankshaft Position Sensor: Service and Repair
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Remove the negative battery cables.
2. Remove the sensor electrical connector.
3. Remove power steering pump.
4. Remove the sensor mounting bolt.
5. Remove the sensor from engine.
IMPORTANT: Care must be taken when handling the sensor.
6. Inspect the sensor O-ring for wear, cracks or leakage and replace if necessary.
INSTALLATION PROCEDURE