C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
5. If equipped with dual generators, install the positive cables to the junction block stud.
6. Install the junction block wire to the stud.
7. Install the junction block washer and nut.
Tighten
Tighten the junction block nut to 4 N.m (35 lb in).
8. Install the junction block cover.
9. Install the positive cable clip to the fuse/relay center bracket.
10. If equipped with a single generator, install the positive battery cable.
11. Install the positive cable to the fuse/relay center stud.
12. Install the fuse/relay center nut.
Tighten
Tighten the fuse/relay center nut to 9 N.m (80 lb in).
13. Install the positive cable clip to the fuse/relay center bracket.