C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
Power Steering Pump: Service and Repair
Pulley Removal and Installation
Power Steering Pulley Replacement
-
Tools Required
-
J 25034-C Power Steering Pump Pulley Remover
-
J 25033-C Power Steering Pump Pulley Installer
Removal Procedure
1. Remove the upper fan shroud. Refer to Fan Shroud Replacement in Cooling Systems.
2. Remove the drive belt. Refer to Drive Belt Replacement in Engine.
3. Remove the power steering pump pulley using the J 25034-C.
Installation Procedure
1. Place the power steering pump pulley on the end of the power steering pump shaft.
2. Install the power steering pump pulley using J 25033-C.
