C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
Front Steering Knuckle: Service and Repair
-
Tools Required
-
J 26813-B Pitman Arm Puller
Removal Procedure
1. Raise the vehicle. Support the vehicle with suitable safety stands.
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation.
3. Remove the bolt (2) retaining the key support to the caliper (1).
4. Remove the support key and the spring using a brass punch and a hammer to drive out the support key.
5. Remove the caliper assembly.
6. Remove the cotter pin and nut retaining the tie rod to the steering arm.
7. Using the J 26813-B remove the tie rod from the steering arm.
