C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
37. Remove the 3-4 shift valve spring (1).
Control Valve Body Assemble
1. Install the 3-4 shift valve spring (1).
2. Install the 3-4 shift valve (2).
3. Install the 3rd ball valve bushing (4) and 3rd ball valve bushing seal (3).
4. Install the 3rd-reverse ball valve (5).
5. Install the reverse ball valve bushing (6).
6. Install the 3rd-reverse ball valve seat pin (7).
7. Install the 2-3 shift valve spring (1).
8. Install the 2-3 shift valve (2).
9. Install the 2-3 shift valve pin (4).
10. Install the 2-3 shift solenoid valve (3).
Notice: Refer to Fastener Notice in Service Precautions.
11. Install the 2-3 shift solenoid valve bolt (5).
^
Tighten the bolt to 8 Nm (71 inch lbs.).