C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
Clutch Pedal Assembly: Service and Repair
Clutch Pedal Replacement
Removal Procedure
1. Locate the clutch cylinder on the dash panel in the engine compartment.
2. Quick connect the hydraulic line to the master cylinder.
3. Turn the clutch cylinder 45 degrees clockwise to unlock the clutch cylinder.
4. Remove the electrical connector from the clutch pedal position switch.
5. Push the clutch pedal all the way down and squeeze in the tabs to release the pushrod bushing form the clutch pedal pocket.
6. Pull the clutch cylinder from the clutch pedal bracket.
^
Complete removal of the clutch cylinder from the dash panel is not required.
^
Ensure the clutch cylinder rod socket is disconnected from the clutch pedal.
7. Remove 3 bolts securing the clutch pedal to the brake pedal support module.
8. Remove the IP Carrier.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.