C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
7. Remove the retaining ring from the wheel hub.
8. Remove the outer hub bearing and the bearing cup using the J35290 (2) and the J8092 (1).
9. Remove the wheel bearing spacer.
Installation Procedure
1. Lubricate the following with a light coat of high melting point EP bearing lubricant:
^
The outer wheel bearing
^
The inner wheel bearing
^
The outer wheel bearing cup
^
The inner wheel bearing cup
^
The axle housing
2. Install the wheel bearing spacer into the wheel hub.
The tabs on the spacer must face towards the inner wheel bearing.