C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
11. Remove the positive cable from the generator.
12. Raise the vehicle.
13. Remove the positive cable nut from the starter.
14. Remove the positive cable from the starter.
15. Lower the vehicle.
16. Remove the cable from the vehicle.
INSTALLATION PROCEDURE
1. Install the cable to the vehicle.
2. Raise the vehicle.
3. Install the positive cable to the starter.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the positive cable nut to the starter.
Tighten
Tighten the positive cable nut to starter to 10 N.m (89 lb in).
