gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

All Technical Service Bulletins for Temperature Gauge: > < Indicator Lamp Remains Illuminated|Page 2619
Page 1
background image

Temperature Gauge: Customer Interest
Engine - High Temperature Gauge Readings

File In Section: 6 - Engine

Bulletin No.: 67-62-02

Date: May, 1996

Subject: 
High Temperature Gauge Readings (Install New Water Pump)

Models: 
1995 Chevrolet and GMC C/K, G, P Models 
with 5.0L V8, 5.7L V8 TBI Engines (VINs H, K - RPOs L03, L05)
1996 Chevrolet and GMC G, P Models 
with 5.7L V8 TBI Engines (VIN K - RPO L05)

Condition

Some owners may experience high temperature gauge readings.

Cause

Insufficient coolant flow from the left leg of the water pump.

Correction

To eliminate all other areas that may be suspect (such as coolant temperature sensors. gauge clusters, and electrical circuits, etc.) perform all diagnostics
listed in the Service Manual. To aid in diagnostics, technicians may want to use instrument panel gauge testers such as Kent-Moore J-33431-C or
J-24538-B. If the overheat condition persists, install a new water pump which optimizes coolant flow from both water pump legs.

Parts Information

Refer to the following part number when replacing a water pump for this condition:

Part Number

Description

12532529

Water Pump

GMSPO and their part suppliers are experiencing critical inventory availability for this part. We are requesting that only immediate customer
requirements (vehicle down) should be placed on a CSO order. Please do not order parts for "shelf" stock. GMSPO expects this availability situation will
improve by September 1996.

Warranty Information

For vehicles repaired under warranty, use:

Labor
Operation

Labor Time

1995 C/K 0.8 hr

J-3480

1995/1996 G 1.4 Hrs

All Technical Service Bulletins for Temperature Gauge: > < Indicator Lamp Remains Illuminated|Page 2619