C 3500 Truck 2WD V8-379 6.2L DSL VIN J FI (1992)
-
Clamp J 9396 in a vise.
Removing The Shaft Nut
-
Compressor to J 9396. Secure with thumb screws.
1. Shaft nut (1) with 9399-A.
-
Hold the clutch plate and Hub assembly (2) with J 25030-A.
2. Clutch plate and hub assembly.
Removing The Clutch Plate And Hub Assembly
-
Thread J 9401-B into the clutch plate and hub (2) (figure 3).
-
Hold the body of J 9401-B with a wrench and tighten the center screw into the remover body.
2. Shaft key (36).
-
Retain the shaft key (36) if usable.
Inspect
-
All parts and replace as necessary.