C 3500 Truck 2WD V8-393 6.5L DSL VIN P (1995)
Wheel Speed Sensor: Service and Repair
Front Wheel Speed Sensor (C3500 HD)
FRONT WHEEL SPEED SENSOR (C3500 HD)
REMOVE OR DISCONNECT
1. Tire and wheel.
2. Brake Caliper.
3. Electrical connector.
4. Two wheel speed sensor bracket retaining bolts.
5. Two wheel speed sensor retaining bolts.
6. Wheel speed sensor from knuckle.
INSTALL OR CONNECT
FASTENER NOTICE
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants,
or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may
damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
1. Wheel speed sensor to knuckle.
2. Wheel speed sensor bracket retaining bolts to knuckle.
TIGHTEN
^
Wheel speed sensor bracket bolt to 250 Nm
3. Wheel speed sensor retaining bolts to bracket.
TIGHTEN
^
Wheel speed sensor nuts to 11 Nm
4. Wheel speed sensor harness retaining bolt.
5. Electrical connector.
6. Hub and rotor.
7. Brake caliper.
8. Tire and wheel.
