C 3500 Truck 2WD V8-454 7.4L VIN J SFI (1999)
Keyless Entry Receiver: Service and Repair
Remote Control Door Lock Receiver Replacement (Base)
REMOVAL PROCEDURE
1. Remove the Daytime Running Lights (DRL) module.
2. Disconnect the electrical connector.
3. Remove the remote control door lock receiver retainer (3).
4. Remove the remote control door lock receiver (2).
INSTALLATION PROCEDURE
1. Install the remote control door lock receiver (2).
2. Install the remote control door lock receiver retainer (3).
3. Connect the electrical connector.
4. Install the DRL module.
5. Inspect the circuit operation of the DRL module.