C 3500 Truck 2WD V8-454 7.4L VIN J SFI (1999)
10. Install two NEW distributor cap screws.
Tighten
Tighten the screws to 2.4 N.m (21 lb in).
11. Install the electrical connector to the distributor.
12. Install the spark plug wires to the distributor cap.
13. Install the ignition coil.
14. Install the air cleaner assembly.
15. Connect a scan tool.
IMPORTANT: If the Malfunction Indicator lamp is turned on after installing the distributor, and a DTC P1345 is found, the distributor has been
installed incorrectly. Refer to Installation Procedure 2 for proper distributor installation.
16. Monitor the Camshaft Retard Offset value. Refer to Computers and Control Systems Camshaft Retard Offset Adjustment.
INSTALLATION PROCEDURE 2
1. Rotate the number 1 cylinder to Top Dead Center (TDC) of the compression stroke.
