C 3500 Truck 2WD V8-454 7.4L VIN J SFI (1999)
REMOVAL PROCEDURE
^
Tools Required
-
J 9746-02 Wheel Stud Remover
1. Remove the tire and wheel assembly.
2. Remove the hub/rotor assembly.
3. Remove the wheel hub bolts with a press.
^
Using the J 9746-02 and the press bars, support the hub/rotor.
Important: Place the J 9746-02 between the press bars and the hub/rotor in order to protect the rotor surfaces.
^
Do not damage the wheel mounting surface on the hub/rotor flange.
INSTALLATION PROCEDURE
1. Install the wheel hub bolts into the hub/rotor.
1.1. Place four washers onto the bolt. Fasten a nut onto the bolt until the nut bottoms on the washers.
1.2. Tighten the nut until the bolt fully seats into the hub/rotor.
1.3. Remove the nut and the washers.
2. Install the hub/rotor to the vehicle.
3. Install the tire and wheel assembly.
4. Lower the vehicle.