C 3500 Truck 2WD V8-454 7.4L VIN J SFI (1999)
1. Install the oil pressure sensor fitting, if removed.
1.1.
Tighten the oil pressure sensor fitting to 15 Nm (11 ft. lbs.).
IMPORTANT: Do not tighten more than one turn.
1.2.
Tighten the fitting until properly align.
2. Install the oil pressure sensor.
3. Hold the oil pressure sensor fitting with a wrench to prevent from turning.
^
Using J 25254-10A tighten the oil pressure sensor to 30 Nm (22 ft. lbs.).
4. Install the electrical connector.
