C 3500 Truck 2WD V8-454 7.4L VIN J SFI (1999)
8. Remove the rotor.
9. Line up the square-cut hole in the rotor vane with the CMP sensor.
10. Remove the two screws that hold the Camshaft Position (CMP) Sensor.
11. Remove the Camshaft Position (CMP) Sensor from the distributor.
INSTALLATION PROCEDURE
IMPORTANT: Do not use the old cap screws, CMP sensor screws, or the distributor rotor screws. Use replacement screws that have been coated
with a thread locking compound. Precoated replacement cap and CMP sensor screws can be aquired using P/N 10475922 (pkg of 10 screws).
Precoated replacement rotor screws can be aquired using P/N 10475924 (pkg of 10 screws).
