C 3500 Truck 2WD V8-454 7.4L VIN J SFI (1999)
-
Tighten the Pitman arm ball stud to 62 Nm (48 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
6. Remove the J 29194.
7. Install the nut to the Pitman arm ball stud.
-
Tighten the nut to 54 Nm (40 ft. lbs.).
8. Install the nut to the drag link ball stud.
-
Tighten the nut to 105 Nm (77 ft. lbs.).
9. Lower the vehicle.
