C 3500 Truck 2WD V8-454 7.4L VIN J SFI (1999)
Band Apply Servo: Service and Repair
Automatic Transmission - 4L60-E
Removal Procedure
^
Tools Required
-
J 29714-A Servo Cover Depressor
1. Raise the vehicle.
2. Install the J29714-A
3. Tighten the bolt in order to compress the servo cover.
4. Remove the servo cover retaining ring.
5. Remove the J 29714-A.
6. Remove the servo cover and the O-ring seal. If the servo cover seems to be hung up on the seal, cut and remove the O-ring seal before removing
the cover.
7. Remove the 2-4 servo assembly.
Installation Procedure
^
Tools Required
-
J 29714-A Servo Cover Compressor
