C 3500 Truck 2WD V8-454 7.4L VIN J SFI (1999)
4. Install the shift cable grommet to the floor panel.
5. Install the shift cable retainers on the cab floor pan.
6. Install the shift cable end to the steering column shift control.
7. Make sure that the steering column transmission shift lever is in Park (P).
8. Install the carpet and the carpet retainers on the driver's side.
9. Raise the vehicle. Refer to Vehicle Lifting.
10. Route the range select lever cable under the fuel lines.
11. Connect the shift cable to the rear transmission bracket.
12. Install the shift cable retainer to the transmission cable bracket.
