C 3500 Truck 2WD V8-454 7.4L VIN J SFI (1999)
1. Install the propeller shaft into the transmission.
2. Lubricate the slip joint spline with chassis grease.
3. Align the reference marks on the pinion flange and the propeller shaft rear yoke.
4. Install the yoke and cross assembly onto the fixed yoke.
5. Install the retainers.
Notice: Refer to Fastener Notice in Service Precautions.
6. Install the bolts.
^
Tighten the bolts to 20 Nm (15 ft. lbs.).
