C 3500 Truck 2WD V8-6.0L VIN U (2001)
Trim Panel: Service and Repair
Body Hinge Pillar Trim Panel Replacement
Body Hinge Pillar Trim Panel Replacement
Removal Procedure
1. Remove door sill plate.
2. Remove hinge pillar panel.
Installation Procedure
1. Install the hinge pillar panel.
2. Install the door sill plate.
Body Rear Corner Garnish Molding Replacement
Body Rear Corner Garnish Molding Replacement
Removal Procedure
1. Remove the rear upper garnish molding.
2. Pull down on the upper corners of the garnish molding in order to disengage the retaining clips.
3. Pull in order to disengage the remaining retaining clips.
4. Remove the rear corner garnish molding from the vehicle.
5. Inspect the rear corner garnish molding for broken or missing retaining clips. Replace the retaining clips as needed.
Installation Procedure
