C 3500 Truck 2WD V8-6.0L VIN U (2001)
5. Remove the engine shield bolts.
6. Remove the engine shield.
7. Remove the oil cooler hose bracket bolt (1).
8. Remove the oil cooler hose adapter bolts (2).
9. Remove the oil cooler hose/pipe assembly and gasket. Discard the gasket.
10. Inspect the fittings, connectors and cooler pipe for damage or distortion.
Installation Procedure
Important:
^
Prior to the installation of the engine oil cooler hose/pipe assembly, install NEW retaining clips to the quick connect fittings.
^
Ensure that the oil cooler hose/pie assembly being installed has plastic caps on the ends of the pipes. If no plastic caps exist, or the plastic cap is
damaged, obtain a new cap. Install the cap on to the cooler line prior to cooler line installation.
1. Do not install the NEW retaining clips onto the fitting by pushing on the clip.
