C 3500 Truck 2WD V8-6.0L VIN U (2001)
Stabilizer Link: Service and Repair
Rear
Stabilizer Shaft Link Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the stabilizer shaft link nut (5) from the frame (1).
3. Remove the stabilizer link nut from the stabilizer shaft (4).
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the stabilizer shaft link to the frame (1) and to the stabilizer shaft and install the retaining nuts (5).
^
Tighten the stabilizer shaft link bolt to the frame (1 ) to 95 Nm (70 ft. lbs.).
^
Tighten the stabilizer shaft link to the stabilizer shaft to 50 Nm (37 ft. lbs.).
2. Lower the vehicle.