C 3500 Truck 2WD V8-6.0L VIN U (2001)
5. Remove the lube oil pipe (5).
6. Remove the manual shaft detent spring assembly (3).
7. Remove the control valve assembly (2) which includes the following:
^
The accumulator housing assembly (1)
^
The control valve assembly to the spacer plate gasket
^
The spacer plate
^
The accumulator gasket
8. Remove the manual valve (1) from the control valve body to prevent any damage.
9. Inspect the manual valve for nicks and burrs.
10. Remove the spacer plate to case gasket (2) from the case. The gasket may stick to the spacer plate.
11. Remove the PWM screen (1) from the case passages.
12. Remove the manual 2-1 band servo assembly (1).
