gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

NV 3500 - Manual Transmission|Page 9252 > < NV 3500 - Manual Transmission|Page 9247
Page 1
background image

Seals and Gaskets: Service and Repair
NV 3500 - Manual Transmission

Transmission Housing Oil Seal Replacement (Front Seal) 

^

Tools Required
-

J 42371 Clutch Release Too[

-

J 38801 Input Seal Installer

Removal Procedure

1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the rear propeller shaft. 
3. Remove the transmission. 
4. Remove the 2 clutch actuator bolts.
5. Remove the clutch actuator from the input shaft.

6. Remove the 6 bolts from the front bearing retainer.

Carefully remove the front bearing retainer.

NV 3500 - Manual Transmission|Page 9252 > < NV 3500 - Manual Transmission|Page 9247