C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
VEHICLE HISTORY
This is the daily maximum speed and mileage of the last 15 days. Previous days' maximum speed and mileage can been seen by pressing the trip
button. The daily maximum speed and mileage can be displayed in either English or Metric units.
ANNUAL MILEAGE
The Annual Mileage Log is the total distance travelled since the last Annual Mileage Log reset. The distance travelled is determined by the DIC using
the discrete 4 Kppm vehicle speed signal from the PCM. The Personal or Business Trip % of the Annual Mileage represents the total annual personal
or business distance travelled.
The Annual Mileage displays a maximum value of 999999.9 in either English or metric units. The Annual Mileage Log does not roll over to zero
when maximum value is attained until the Annual Mileage Log is reset.
The Personal or Business Trip % of Annual Mileage displays XXX % of Annual Mileage. The data value range is 0 to 100 and updated after every
1% increase of the data value.
BLANK DISPLAY
The DIC displays no information when selected from the Trip Mode. If it is the last displayed parameter before exiting the Trip Mode, the Personal
Trip Computer On/Off parameter will be the first displayed parameter when re-entering the Trip Mode.
FUEL MODE
Fuel Range
The Fuel Range display is the estimated distance that the vehicle can travel based on current fuel economy, fuel level and fuel capacity conditions. The
DIC receives class 2 messages from the PCM indicating the cumulative fuel, fuel level percent and the fuel capacity. The DIC uses the distance
information from the 4 Kppm vehicle speed signal from the PCM. The fuel range parameter is displayed in the DIC in one of the following formats
^
FUEL REMAINING RANGE: LOW MI
^
FUEL REMAINING RANGE: LOW km
^
FUEL REMAINING RANGE: ### MI
^
FUEL REMAINING RANGE: ### km
The ### represents the calculated fuel range value. When the fuel level is in the low range there are no units displayed. The units of the display are
English and metric and the fuel range cannot be reset by the driver.
Average Fuel Economy
The Average Fuel Economy (AFE) is calculated from the fuel usage and the distance travelled information from the PCM. The vehicle fuel usage
information is transmitted via class 2 to the DIC and the distance travelled is based on 4 Kppm vehicle speed signal from the PCM.
Pressing the Reset button while the Average Fuel Economy is displayed in the DIC will reset the Average Fuel Economy data value currently
displayed. Average Fuel Economy is capable of displaying values from 0.0 to 99.9.
Display appears as:
^
AVG FUEL ECON: ##.# MPG (English)
^
AVG FUEL ECON: ##.# L/100km (Metric)
Instantaneous Fuel Economy
The Instantaneous Fuel Economy is calculated from the fuel usage and the distance travelled information from the PCM. The vehicle fuel usage
information is transmitted via class 2 to the DIC and the distance travelled is based on the 4 Kppm vehicle speed signal from the PCM.
Instantaneous Fuel Economy (IFE) is capable of displaying values from 0 to 99 in whole number increments. The minimum displayed data value for
the IFE is 0 MPG (English) and 99 L/100 km (Metric). Display appears as:
^
INST FUEL ECON: XX MPG (English)
^
INST FUEL ECON: XX L/100km (Metric)
Values for the Instantaneous Fuel Economy vary in low speed condition. If the vehicle speed is less than 1.2 mph, the IFE value will display 0 MPG.
Blank Display
The DIC displays no information when selected from the Fuel Mode. If it is the last displayed parameter before exiting the Fuel Mode, the Fuel Range
parameter will be displayed first when re-entering the Fuel Mode.
MENU MODE
The DIC display and vehicle personalization options are available in the Menu Mode. If the Driver ID parameter is available (Cadillac only), the DIC
display and vehicle personalization options can be selected independently for 2 different drivers. The DIC also offers an internal programmable real
time clock. The Menu mode has three options:
^
Personalization
^
Set Day/Date/Time
