C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
Installation Procedure
1. Install motor by aligning gear teeth and mounting points simultaneously, pushing the motor into the gear/spool and installing the motor to housing
fastener first (3).
2. Slide the motor and housing assembly (4) onto the rail (5) and install the fastener number two (2).
Notice: Refer to Fastener Notice .
3. Rotate the motor and housing assembly to align the attachment point for attachment number one (1) and install the fastener.
Tighten the bolts to 5 Nm (44 lb in).
4. Install the power window module. Refer to Front Side Door Window Module Replacement (See: Front Side Door Window Module Replacement
).
5. Install the window if removed. Refer to Front Side Door Window Replacement (See: Front Door Window Glass/Service and Repair).
