C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
Carpet: Procedures
Carpet Replacement - Front
REMOVAL PROCEDURE
1. Remove the hinge pillar trim panel.
2. Remove the door sill plates.
3. Remove the front seats.
4. Remove the floor storage console.
5. Remove the center seat, if equipped.
6. Remove the control lever and the boot, if equipped.
7. Remove the rear seat if equipped.
8. Remove the jack assembly.
9. Remove the quarter trim panel.
10. Remove the lower bolt from the instrument panel (I/P) support post.
11. Remove the carpet from the vehicle.
INSTALLATION PROCEDURE
CAUTION: In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material
size as the original Installation. Always return the carpet to the original location.
1. Install the carpet to the vehicle.
2. Install the lower bolt to the I/P support post.
3. Install the rear quarter trim panel.
