C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
Drink Holders: Procedures
Except Pro
REMOVAL PROCEDURE
1. Tilt the cupholder down.
2. Remove the screws holding the cupholder to the instrument panel (I/P).
3. Remove the cupholder from the vehicle.
INSTALLATION PROCEDURE
1. Position the cupholder to the I/P.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the screws holding the cupholder to the I/P.
Tighten
Tighten the screws to 2 N.m (18 lb in).
3. Return the cupholder to the up position.
Pro
REMOVAL PROCEDURE
