C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
2. Remove the pillar moldings by holding the moldings firmly while pulling out.
Installation Procedure
1. Install the pillar moldings by pushing until the molding locks into place.
2. Install the door sill trim plates. Refer to Front Side Door Sill Trim Plate Replacement (See: Scuff Plate/Service and Repair/Removal and
Replacement/Front Side Door Sill Trim Plate Replacement) or Rear Side Door Sill Trim Plate Replacement (See: Scuff Plate/Service and
Repair/Removal and Replacement/Rear Side Door Sill Trim Plate Replacement).
Rear Quarter Trim Panel Replacement (Extended Cab)
Rear Quarter Trim Panel Replacement (Extended Cab)
Removal Procedure
1. Remove the rear seat, if necessary. Refer to Rear Seat Replacement (Extended Cab w/4th Door) (See: Seats/Service and Repair/Rear Seat
Replacement (Extended Cab w/4th Door))Rear Seat Replacement (Extended Cab) (See: Seats/Service and Repair/Rear Seat Replacement
(Extended Cab))Rear Seat Replacement (60/40 Split) (See: Seats/Service and Repair/Rear Seat Replacement (60/40 Split)).
2. Remove the rear window molding. Refer to Rear Window Lower Garnish Molding Replacement (See: Rear Window Lower Garnish Molding
Replacement).
3. Remove the armrest screw.
