C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
Memory Positioning Systems: Description and Operation
Driver Personalization
MEMORY SEAT PROGRAMMING
Perform the following actions in order to program the memory seats for 2 separate drivers:
1. Move the seat to the desired position.
2. Press the memory set switch. A chime should be heard.
3. Press the correct memory seat button for the specific driver within 5 seconds after pressing the memory set switch. A chime should be heard.
4. Repeat the steps for the second driver.
PROGRAMMING FEATURES WITH THE SECONDARY INFORMATION CENTER
To enter programming with the SIC, perform the following actions:
1. Turn ON the ignition with the engine OFF.
2. Ensure that the vehicle is in PARK or that the park brake is applied.
3. Press the MENU button on the SIC.
AUTOMATIC DOOR LOCKS
Continue with the following steps in order to program the automatic door locks feature:
1. The SIC displays AUTOMATIC DOOR LOCKS: ENABLED or DISABLED.
2. Press the arrow button on the SIC in order to select the desired choice.
3. Press the MENU button in order to advance to the next option.
4. The SIC displays AUTOMATIC DOOR UNLOCK: DRIVER, ALL, or DISABLED.
5. Press the arrow button on the SIC in order to select the desired choice.
6. Press the MENU button in order to advance to the next option.
REMOTE ACTIVATION VERIFICATION
Continue with the following steps in order to program the remote activation verification feature:
1. The SIC displays REMOTE LOCK FEEDBACK: HORN, LAMPS, HORN&LAMPS, or NONE.
2. Press the arrow button on the SIC in order to select the desired choice.
3. Press the MENU button in order to advance to the next option.
4. The SIC displays REMOTE UNLOCK FEEDBACK: HORN, LAMPS, HORN&LAMPS, or NONE.
5. Press the arrow button on the SIC in order to select the desired choice.
6. Press the MENU button in order to advance to the next option.
HEADLAMP DELAY
Continue with the following steps in order to program the headlamp delay feature:
1. The SIC displays HEADLAMP DELAY: NONE, 10, 20, 30, 60, 120, or 180.
2. Press the arrow button on the SIC in order to select the desired choice.
3. Press the MENU button in order to advance to the next option.
PERIMETER LIGHTING
Continue with the following steps in order to program the perimeter lighting feature:
1. The SIC displays PERIMETER LIGHTS: ENABLED or DISABLED.
2. Press the arrow button on the SIC in order to select the desired choice.
3. Press the MENU button in order to advance to the next option.
MEMORY POSITION RECALL
Continue with the following steps in order to program the memory position recall feature:
1. The SIC displays MEMORY POSITION RECALL: REMOTE, KEY IN, DISABLED.
2. Press the arrow button on the SIC in order to select the desired choice.
3. Press the MENU button in order to advance to the next option.
EXIT POSITION RECALL
Continue with the following steps in order to program the exit position recall feature:
1. The SIC displays EXIT POSITION RECALL: ENABLED or DISABLED.
2. Press the arrow button on the SIC in order to select the desired choice.
3. Press the MENU button in order to advance to the next option.
MIRROR REVERSE TILT
Continue with the following steps in order to program the Mirror Reverse Tilt feature:
1. The SIC displays MIRROR REVERSE TILT: PASSENGER, DRIVER, ALL, or DISABLED.
2. Press the arrow button on the SIC in order to select the desired choice.
3. When the vehicle is shifted into REVERSE and the Mirror Reverse Tilt feature is activated, any adjustments made to the preset position now
becomes the new set position stored, this feature can be customized for each driver.
4. Press the MENU button in order to advance to the next option.
